Soft Film Universal Tutorial (Positioner Version)

⚠For best results, install in a clean, dust-free area

Screen Cleaning：

1. Clean screen with alcohol wipe

2. Dry screen with cleaning cloth

3. Remove dust with sticker

⚠After cleaning, please make sure the screen is free of dust before proceeding with the installation

Installation Process：

4. Plug the tracker into the phone's charging port

5. Peel off layer ①

6. Align film side ③ with tracker clip, then side ② with camera.(Please ensure the camera is aligned with side ②; otherwise, it will affect subsequent installation.)

7. Use the scrapper to stick the protective film on the screen

8. Peel the No. ② protective film at the top down to the dotted line in the middle, then use the squeegee to press from the No. ② dotted line area toward the top edge, and remove the remaining release liner

9. Remove the installation tool

10. Peel the No. ③ protective film at the top down to the dotted line in the middle, then use the squeegee to press from the No. ③ dotted line area toward the top edge, and remove the remaining release liner

11. Smooth the film edges one by one with the included cloth

12. Apply the included strip sticker to the outermost white protective film and help to peel off

13. Give the screen protector edges a final smooth all over with the included cleaning cloth