Samsung Folding Film Universal Tutorial (Positioning Frame Version)
Outer Screen(Inner screen instructions are at the bottom of this article)
⚠For best results, install in a clean, dust-free area
Screen Cleaning：
1.Close your foldable phone and place it screen-side up on a flat surface
2. Clean the screen with a wet wipe
3. Dry the screen with a dry cleaning cloth
4. Remove dust with a dust sticker
⚠After cleaning, please make sure the screen is free of dust before proceeding with the installation
Installation Process：
5. Place the single-screen alignment frame with the "TOP" label on the side near the camera, then snap the frame onto your phone
6. Peel off the protective film from the tempered glass
7. Align the side of the screen protector with the cutouts over your phone’s camera holes, then gently press the protector onto the screen
8. Slide the "T" area to stick the glass firmly
9. Remove the alignment frame
10. Smooth edges with the included cloth
Inner Screen
⚠For best results, install in a clean, dust-free area
Accessory Installation：
1. Unfold your foldable phone’s inner screen and place it face-up on a flat surface
2. Fit your phone into the dual-screen alignment frame, aligning the inner camera side with the frame’s "TOP" label
Screen Cleaning：
3. Clean the screen with a wet wipe
4. Dry the screen with a dry cleaning cloth
5. Remove dust with a dust sticker
⚠After cleaning, please make sure the screen is free of dust before proceeding with the installation
Installation Process：
6. Align the film’s "TOP" side with the frame’s "TOP" label
7. Peel off layer ①
8. Align the holes with the frame's pins and snap in
9. Lift layer ② and use the scraper to push the bottom film out
10. Lift layer ③ and use the scraper to push the bottom film out
11. Apply the included strip sticker to the outermost white protective film and help to peel off
